Home >
Products > Mini-PC & AIO > All-in-one > X50V5 SERIES
X50V5 SERIES
How do I clean a Shuttle XPC all-in-one?
2019/07/16
Proceed as follows to clean the device:
1) First switch off the device and unplug the DC power cord.
2) Use a soft, lint-free cloth for cleaning; a clean microfibre cloth is ideal.
- A dry cloth is generally sufficient.
- To achieve a better cleaning effect, the cloth can be slightly wet with water.
- For disinfection, a cleaning agent containing alcohol (max. 75%) may be used.
- Never spray cleaning agent directly onto the monitor, but just onto the cloth.
- Sweep the cloth carefully across the monitor from top to bottom.
- If you have dampened the cloth slightly, you should then use a second soft and dry cloth to reliably remove all moisture.
3) The best way to clean crevices, corners or sockets is to use a soft brush carefully.
- When you do this, hold the brush as upright as possible so that only the bristles of the brush touch the device and the surround of the bristles cannot scratch the surface.
4) If dust accumulates in the ventilation slots, it should be sucked out using a brush attachment.
- When you do this, make sure that the vacuum cleaner attachment does not touch the device.
1) First switch off the device and unplug the DC power cord.
2) Use a soft, lint-free cloth for cleaning; a clean microfibre cloth is ideal.
- A dry cloth is generally sufficient.
- To achieve a better cleaning effect, the cloth can be slightly wet with water.
- For disinfection, a cleaning agent containing alcohol (max. 75%) may be used.
- Never spray cleaning agent directly onto the monitor, but just onto the cloth.
- Sweep the cloth carefully across the monitor from top to bottom.
- If you have dampened the cloth slightly, you should then use a second soft and dry cloth to reliably remove all moisture.
3) The best way to clean crevices, corners or sockets is to use a soft brush carefully.
- When you do this, hold the brush as upright as possible so that only the bristles of the brush touch the device and the surround of the bristles cannot scratch the surface.
4) If dust accumulates in the ventilation slots, it should be sucked out using a brush attachment.
- When you do this, make sure that the vacuum cleaner attachment does not touch the device.
Important warnings:
Do not use any cleaning agents that are not suitable for LCDs. To do this, check the product specifications.
Do not use any cleaning agents that are not suitable for LCDs. To do this, check the product specifications.
Avoid the following cleaning agents, because they may damage the monitor and chassis:
- Agents which contain solvents, for example gasoline, acetone, paint thinner
- Agents which contain acid, for example vinegar or citric acid
- Agents which contain abrasive particles
- Car care products such as car polish or car wax
- Agents which contain solvents, for example gasoline, acetone, paint thinner
- Agents which contain acid, for example vinegar or citric acid
- Agents which contain abrasive particles
- Car care products such as car polish or car wax
Service Center Info
Hot Line : 886-2-8792-6168Hours : Monday through Friday 09:00 to 12:00
13:00 to 18:00 Taiwan Time (GMT+8)
E-mail : Tech Support Form
